£635.00

RRP: £732

Free UK delivery on all orders over £50
  • Unique over-balanced, diaphragm design – as the diver descends, the over-balancing feature allows the medium pressure gas in the hose to increase at a rate faster than ambient. This results in superior performance at depth.
  • An environmental dry system keeps water out of the main spring chamber thus preventing ice buildup and keeping silt and contamination out.
  • The XTX purge buttons are large and easy to operate. A 2-stage progressive purge is used – press the purge on the side for a lower flow rate, useful where more control is required such as filling lift bags etc, then press in the centre for the full effect of the purge, i.e. when regulator clearing etc.
If you purchase this product you will earn 1270 Points! Worth £12.70!
If you purchase this product you will earn 1270 Points! Worth £12.70!
Clear

Description

The Apeks XTX200 Stage 3 Regulator Set is the top-of-the-range Stage 3 set from Apeks .

The XTX200 represents the ultimate in technical diving performance and modern style.Fully balanced, the XTX200 is engineered to provide uncompromising performance and relaxed, effortless breathing in any extreme environment.

The FSR 1st stage is environmentally sealed. This prevents ice build-up in the mainspring chamber, allowing you to dive in extremely cold water. It also protects you against contaminants getting into the system and impeding the quality of your air or harbouring bacteria. Air is supplied by 4 low pressure and 2 high pressure angled ports, allowing you to easily route your cables.

The XTX 2nd stage features a heat exchanger which surrounds the valve mechanism, the extracts as much heat as possible from the ambient water, increasing the temperature of the air within the 2nd stage, ensuring comfortable breathing temperatures. The venturi switch and open control knob gives you control to configure your how your regulator functions on the fly to avoid free-flow and achieve the ideal breathing experience.

A high-quality braided hose connects the 1st and 2nd stages. In comparison to rubber, braided hoses are more flexible and durable while also being lighter.

The XTX200 Regulator is designed to stun, both in terms of outright performance and stunning chrome aesthetic. There is no doubt that the XTX200 is one of the most impressive technical regulators available today.

Features

First Stage:

FSR style first stage.
Highly polished bright chrome plating.
Compact one piece body.
4 angled medium pressure ports, 4 x 3/8” UNF.
2 angled high pressure ports, 2 x 7/16” UNF.
Optional 5th port.
Removable ARCAP valve seat.
Unique over-balanced, diaphragm design – as the diver descends, the over-balancing feature allows the medium pressure gas in the hose to increase at a rate faster than ambient. This results in superior performance at depth.
An environmental dry system keeps water out of the main spring chamber thus preventing ice buildup and keeping silt and contamination out
Second Stage:

Pneumatically-balanced second stage results in smooth, easy breathing.
The XTX purge buttons are large and easy to operate. A 2-stage progressive purge is used – press the purge on the side for a lower flow rate, useful where more control is required such as filling lift bags etc, then press in the centre for the full effect of the purge, i.e. when regulator clearing etc.
The large venturi lever has a soft touch rubber grip, which makes it easier to locate and use. The lever reduces the amount of grit ingress and therefore resists any possible friction giving a smooth operation.
Easy-to-grip opening effort control knob keeps the diver in control.
The second stage is manufactured with active protection against infection as all molded parts are produced with an additive that kills MRSA, protects against E-Coli, bacteria and fungi, and is also very effective against viruses, mould, yeast and algae.
A silicone exhaust valve improves the breathing performance of the regulator.
The Comfo-bite™ mouthpiece virtually eliminates jaw-fatigue.
A heat exchanger (patented) which surrounds the valve mechanism, dissipates the cold caused by gas expansion while drawing in the warmth of the ambient water.
Compatible with EAN40 out of the box.

Specifications

Connections Yoke and DIN available
Type of first stage Over-balanced diaphragm design, environmentally sealed
Body Type One piece forged body
Number of HP ports 2 (7/16″ UNF)
Number of MP ports 4 with 5th port option (3/8″ UNF)
Environmental Dry Kit Standard
First stage exterior Chrome over marine brass
Orientation Convertible LH or RH
Coldwater Use Yes
Type of second stage Pneumatically balanced
Opening Effort Control Knob Yes
Integrated Venturi Lever Yes
Mouthpiece Comfo-bite™
Exhaust tee Diver Changeable – comes with 2 sets
Heat Exchanger for freezing resistance Yes
Hose type Braided Flexi-hose
Overall work of breathing (WOB) scores Avg. 0.70 joules/liter
Nitrox compatible Yes to 40% O2 when new, out of the box / Can be cleaned to 100%
Weight Yoke 1272g / DIN 1142g

Video

Returns

Scuba Dive Store always offer an extended returns policy of 30 days – so you can rest assured that if the suit, piece of diving equipment or gift doesn’t suit then just send it back and we will either exchange it or offer a full refund less any postage costs.
Click here for full terms and conditions >

Reviews

There are no reviews yet.

Be the first to review “APEKS XTX200 STAGE 3 REGULATOR SET”

Your email address will not be published. Required fields are marked *

×

Cart